Flagpole - 21' Telescoping
Our 21 foot Liberty EZPOLE® is a telescopic pole and features our “No Drop
Posi-Loc®” dual-locking system, preventing the common pole collapse with
our competitor’s telescopic poles. The Liberty EZPOLE® comes with our
360 degree "No Wrap" swivel and button system that allows your flag to
fly freely without wrapping or getting tangled around the pole.
All EZPOLE Flagpoles come with anodized (320 grit polish) aluminum
finish, removing all scratches and imperfections from the surface of our
flagpole. We put the extra quality and care into each of our
flagpoles, giving the pole a nice smooth textured brush finish.
o raise or lower the 21' Liberty EZPOLE, simply twist the pole
sections in opposite directions to unlock and lock your pole.
To raise and engage the “No Drop Posi-Loc®” on each section of the 21’ Liberty, hold the lower pole still while extending the pole
section fully until it stops. Then turn the pole clockwise until the
button extends into the round hole on the lower pole. Once the button
snaps into position, turn the upper pole back counter clockwise to lock
the section. Repeat for each additional section.
To lower the pole, starting with the largest diameter pole twist
upper pole section clockwise to unlock. Once unlocked, carefully
disengage the button by turning in and twisting pole section right to
clear from hole. Lower pole section completely until it stops and repeat
for each additional section.
The 21’ Liberty adjusts to height increments of 9’6” up to 21’ and has 4
sections, with outside diameters of 1.75”, 2”, 2.25” and 2.5”. The various diameter
sizes create true, tapered pole look.
-
Liberty Kit Contents
- Assembled Telescoping Flagpole
- Hardware Kit- (4) Stainless Steel clips, (1) Top Swivel, (1) Top Washer
& Flag Etiquette Pamphlet - Gold Anodized Aluminum Ball
- Aluminum Ground Sleeve
- Instruction Sheet
- 27"x54" Canadian Flag
- Kit Weight- 21'= 18 lbs.